OBD-II DTC · SAE J2012
U068A
Lost Communication With Barometric Pressure Sensor C
What U068A means
U068A is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Lost Communication With Barometric Pressure Sensor C. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when U068A is active
MAF / MAP / boost sensor MIL, no-start in cold weather, intermittent stalling, signal out-of-range codes after intake / turbo upgrades.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove U068A with Softechpro V5
Recommended service: DTC OFF (air metering branch). Step-by-step workflow:
- Diagnose the air metering sensor first (multimeter, scope, OEM scan tool).
- If the sensor is healthy but the code is triggered by an intake upgrade or oversized turbo: load bin into Softechpro V5, select DTC OFF + air metering group.
- Save patched .bin and flash. The sensor reads remain functional — only the DTC trigger window is widened.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.