OBD-II DTC · SAE J2012
P2C99
Throttle Actuator A Control Exceeded Learning Limit
What P2C99 means
P2C99 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Throttle Actuator A Control Exceeded Learning Limit. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when P2C99 is active
Limp mode, pedal-to-throttle correlation MIL, idle-air control range / performance DTC, throttle body adaptation failures.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove P2C99 with Softechpro V5
Recommended service: DTC OFF (throttle branch) — diagnose first. Step-by-step workflow:
- Throttle codes often indicate genuine carbon buildup or pedal sensor drift. Clean the body and reset adaptation before tuning.
- If the code persists after cleaning: load .bin into Softechpro V5, pick DTC OFF + throttle DTC group, save patched .bin, flash back.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.