OBD-II DTC · SAE J2012
P240E
Alternative Fuel High Pressure System Leak
What P240E means
P240E is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Alternative Fuel High Pressure System Leak. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when P240E is active
Hard start, fuel pressure regulator MIL, injector circuit codes, lean / rich trim codes after a fuel system component swap.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove P240E with Softechpro V5
Recommended service: DTC OFF (fuel branch) — only after fixing the root cause. Step-by-step workflow:
- Diagnose first: fuel pressure, injector flow, regulator function.
- If the code persists after repair due to ECU adaptation lag, Softechpro V5 DTC OFF can suppress the residual code.
- Load .bin, select DTC OFF + the fuel DTC group, save patched .bin, flash back.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.