OBD-II DTC · SAE J2012
P22C4
O2 Sensor Pumping Current Trim Circuit High Bank 2 Sensor 2
What P22C4 means
P22C4 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: O2 Sensor Pumping Current Trim Circuit High Bank 2 Sensor 2. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when P22C4 is active
Lambda heater circuit MIL, lean / rich correction warnings after sensor replacement, post-cat O2 issues after a downpipe upgrade.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove P22C4 with Softechpro V5
Recommended service: DTC OFF (O2 branch) or CAT OFF. Step-by-step workflow:
- If the issue is a post-cat sensor after de-cat: use Softechpro V5 CAT OFF (mirrors the upstream sensor).
- If it's an upstream heater fault: diagnose wiring first; use DTC OFF only as a last resort.
- Load bin, pick the right service, save patched .bin, flash.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.