P1404

P1404 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: IAT - B Circuit Malfunction/ Exhaust Gas Recirculation Closed Position Performance. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.

Rough idle, intermittent power loss under load, EGR valve fault MIL, persistent flow / position / temperature codes after EGR cleaning or blanking plate install.

Very common service. EGR mechanical failure (sticking, carbon buildup) often pairs with ECU-side EGR off. Off-road or motorsport only.

Recommended service: EGR OFF. Step-by-step workflow:

1. Load the ECU bin into Softechpro V5 (drag & drop into the workspace).
2. Pick EGR OFF from the service tabs.
3. Softechpro disables the EGR position target, flow rate request, lambda correction tied to EGR, and the DTC trigger logic that raises this code.
4. Save the patched file — checksum + integrity blocks are auto-rebuilt for your specific ECU revision.
5. Flash via any OBD or bench tool. The DTC stays cleared after multiple drive cycles.

Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.