OBD-II DTC · SAE J2012
P087E
Clutch Position Sensor B Circuit Intermittent
What P087E means
P087E is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Clutch Position Sensor B Circuit Intermittent. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when P087E is active
Specific sensor range / performance MIL, intermittent signal drop, MIL clears on key-cycle but returns within minutes.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove P087E with Softechpro V5
Recommended service: DTC OFF (sensor-specific) — diagnose wiring first. Step-by-step workflow:
- Sensor / circuit codes are usually wiring, ground, or sensor drift. Check the harness and connector first.
- If the sensor is verified healthy but the code is a known false-positive (often on aged vehicles), Softechpro V5 DTC OFF can suppress just that code.
- Load .bin, locate the DTC, save patched .bin with that code's trigger neutralised, flash.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.