P0608

P0608 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Control Module VSS Output A. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.

Multiple module MILs at once, U-code family lit, intermittent module dropouts (especially after a battery disconnect or coding change).

Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.

Recommended service: DTC OFF (communication branch) — fix wiring first. Step-by-step workflow:

1. Communication codes often mean a bad CAN line, dead module, or coding mismatch. Fix the bus first.
2. If a coded-out module legitimately remains absent (e.g. removed AdBlue heater), Softechpro V5 DTC OFF can suppress the U-code referencing the missing module.
3. Load .bin, select DTC OFF + communication group, save, flash.

Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.