OBD-II DTC · SAE J2012
P0105
Manifold Absolute Pressure/Barometric Pressure Sensor Circuit
What P0105 means
P0105 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: Manifold Absolute Pressure/Barometric Pressure Sensor Circuit. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when P0105 is active
MAF / MAP / boost sensor MIL, no-start in cold weather, intermittent stalling, signal out-of-range codes after intake / turbo upgrades.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove P0105 with Softechpro V5
Recommended service: DTC OFF (air metering branch). Step-by-step workflow:
- Diagnose the air metering sensor first (multimeter, scope, OEM scan tool).
- If the sensor is healthy but the code is triggered by an intake upgrade or oversized turbo: load bin into Softechpro V5, select DTC OFF + air metering group.
- Save patched .bin and flash. The sensor reads remain functional — only the DTC trigger window is widened.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.