OBD-II DTC · SAE J2012
C0093
4WD/AWD Power Transfer Unit Temperature Sensor
What C0093 means
C0093 is a standard SAE J2012 powertrain diagnostic trouble code with the defined meaning: 4WD/AWD Power Transfer Unit Temperature Sensor. This is the OEM-agnostic definition; specific manufacturer interpretation may add detail (subsystem, bank, sensor location) but the core meaning is consistent across all OBD-II compliant vehicles since 1996.
Common symptoms when C0093 is active
Coolant temp sensor MIL, fan stays on / off, thermostat performance DTC, heater core slow to warm.
Can this code be suppressed via ECU tuning?
Whether this code is safe to suppress depends on the underlying cause. Diagnose first, suppress only after confirming the mechanical issue is benign or rectified.
How to remove C0093 with Softechpro V5
Recommended service: DTC OFF (cooling branch). Step-by-step workflow:
- Check the thermostat / sensor / fan circuit physically first.
- If the issue is a long-standing nuisance code on an old vehicle, Softechpro V5 DTC OFF can suppress it.
- Load .bin, select cooling DTC group, save, flash.
Softechpro V5 supports 1,400+ ECU firmwares across Bosch (EDC15, EDC16, EDC17, MD1, MG1, ME7, MED17), Siemens / Continental (SID, SIMOS, EMS), Delphi (DCM, DDC), and Magneti Marelli platforms.