Insufficient RPM Increase During Spark Test
On Jaguar vehicles, P1370 is logged when the ECU detects a fault in the ignition / combustion: “Insufficient RPM Increase During Spark Test”. P1370 is a manufacturer-specific Jaguar code (the "1" after the letter marks an OEM-defined code), so its meaning applies to Jaguar and may differ on other makes.
Typical triggers for a ignition / combustion code like P1370 include faulty or ageing sensors, wiring/connector faults, a clogged or removed component, or a value drifting outside the ECU's expected window. Symptoms range from a check-engine light only, to limp mode, rough running, higher consumption or failed emissions tests.
When a Jaguar has had hardware changed for off-road/motorsport use (for example a removed DPF or EGR), the related monitor must be disabled in the ECU map or the code re-appears. Softechpro Solutions performs DPF/EGR/AdBlue/DTC off and recalculates the checksum, so codes like P1370 stay cleared after the flash. Genuine faults should always be repaired, not just hidden.
Softechpro Solutions does DPF/EGR/AdBlue/DTC off + checksum for 260+ ECU families — from €98.99/mo.
See pricing Ask on WhatsApp