Dodge P0601

What P0601 means on a Dodge

On Dodge vehicles, P0601 is logged when the ECU detects a fault in the powertrain: “Internal PCM Controller Failure”. P0601 is a generic SAE code — see the universal P0601 page too.

Common causes & symptoms

Typical triggers for a powertrain code like P0601 include faulty or ageing sensors, wiring/connector faults, a clogged or removed component, or a value drifting outside the ECU's expected window. Symptoms range from a check-engine light only, to limp mode, rough running, higher consumption or failed emissions tests.

P0601 and ECU tuning

When a Dodge has had hardware changed for off-road/motorsport use (for example a removed DPF or EGR), the related monitor must be disabled in the ECU map or the code re-appears. Softechpro Solutions performs DPF/EGR/AdBlue/DTC off and recalculates the checksum, so codes like P0601 stay cleared after the flash. Genuine faults should always be repaired, not just hidden.

Related Dodge codes