Buick P1310

What P1310 means on a Buick

On Buick vehicles, P1310 is logged when the ECU detects a fault in the ignition / combustion: “Ignition Coil 3 Primary Feedback Circuit”. P1310 is a manufacturer-specific Buick code (the "1" after the letter marks an OEM-defined code), so its meaning applies to Buick and may differ on other makes.

Common causes & symptoms

Typical triggers for a ignition / combustion code like P1310 include faulty or ageing sensors, wiring/connector faults, a clogged or removed component, or a value drifting outside the ECU's expected window. Symptoms range from a check-engine light only, to limp mode, rough running, higher consumption or failed emissions tests.

P1310 and ECU tuning

When a Buick has had hardware changed for off-road/motorsport use (for example a removed DPF or EGR), the related monitor must be disabled in the ECU map or the code re-appears. Softechpro Solutions performs DPF/EGR/AdBlue/DTC off and recalculates the checksum, so codes like P1310 stay cleared after the flash. Genuine faults should always be repaired, not just hidden.

Related Buick codes