Audi P3100

What P3100 means on a Audi

On Audi vehicles, P3100 is logged when the ECU detects a fault in the powertrain: “High voltage powertrain control module failure”. P3100 is a manufacturer-specific Audi code (the "1" after the letter marks an OEM-defined code), so its meaning applies to Audi and may differ on other makes.

Common causes & symptoms

Typical triggers for a powertrain code like P3100 include faulty or ageing sensors, wiring/connector faults, a clogged or removed component, or a value drifting outside the ECU's expected window. Symptoms range from a check-engine light only, to limp mode, rough running, higher consumption or failed emissions tests.

P3100 and ECU tuning

When a Audi has had hardware changed for off-road/motorsport use (for example a removed DPF or EGR), the related monitor must be disabled in the ECU map or the code re-appears. Softechpro Solutions performs DPF/EGR/AdBlue/DTC off and recalculates the checksum, so codes like P3100 stay cleared after the flash. Genuine faults should always be repaired, not just hidden.

Related Audi codes