Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM
On Audi vehicles, P0135 is logged when the ECU detects a fault in the O2 / lambda: “Defective Oxygen Sensor/Air Fuel Ratio Sensor, defective Oxygen Sensor/Air Fuel Ratio Sensor Heater Circuit, Exhaust System Leak, Intake Air System leak, Low Fuel Pressure, Defective Engine Coolant Temperature Sensor, Defective sensor wiring and or circuit problem, PCM software needs to be updated, Defective PCM”. P0135 is a generic SAE code — see the universal P0135 page too.
Typical triggers for a O2 / lambda code like P0135 include faulty or ageing sensors, wiring/connector faults, a clogged or removed component, or a value drifting outside the ECU's expected window. Symptoms range from a check-engine light only, to limp mode, rough running, higher consumption or failed emissions tests.
When a Audi has had hardware changed for off-road/motorsport use (for example a removed DPF or EGR), the related monitor must be disabled in the ECU map or the code re-appears. Softechpro Solutions performs DPF/EGR/AdBlue/DTC off and recalculates the checksum, so codes like P0135 stay cleared after the flash. Genuine faults should always be repaired, not just hidden.
Softechpro Solutions does DPF/EGR/AdBlue/DTC off + checksum for 260+ ECU families — from €98.99/mo.
See pricing Ask on WhatsApp